Classe Audio CDP-100 CD Player User Manual


 
29
Specifications
Classé Audio reserves the right to make improvements without notice.
Frequency response 20Hz – 20kHz ± 0.1dB
Signal-to-noise ratio 110dB typical
Channel separation better than 110dB
Distortion (THD + noise) less than 0.002%
(unweighted, 0dBFS signal, 10Hz – 20kHz)
Maximum output voltage (0dBFS signal) 2Vrms (single-ended)
4Vrms
(balanced)
Analog output 1 balanced (XLR)
1 single-ended (RCA)
Digital output (S/PDIF) 0.5V, 75Ω (RCA)
Digital-to-analog conversion dual differential 24-bit DACs
Analog filter 2 cascaded 1st order Bessel filters
Clock jitter less than 2 picoseconds
Sample rate 352.8kHz
Formats supported CD, CD-R, CD-RW, HDCD
®
Rated power consumption 30W
Idle power consumption 29W
Mains voltage specified on rear panel decal
(cannot be changed by user or dealer)
.
Dimensions (not incl. controls or connectors) Width: 17.5" (445mm)
Height: 4.75" (121mm)
Depth: 16.5" (419mm)
Net weight 26lbs (12kg)
Shipping weight 33lbs (15kg)
For more information, see your Classé dealer or contact:
Classé Audio
5070 François Cusson
Lachine, Quebec
Canada H8T 1B3
Telephone +1 (514) 636-6384
FAX +1 (514) 636-1428
http://www.classeaudio.com
email: cservice@classeaudio.com
Classé and the Classé logo are trademarks of Classé Audio Inc. of Lachine, Canada. All rights reserved.
i-Command™ is a trademark of Equity International, Inc. All rights reserved.
AMX® is a registered trademark of AMX Corporation of Richardson, TX. All rights reserved.
Crestron™ is a trademark of Crestron Electronics, Inc. of Rockleigh, NJ. All rights reserved.
HDCD®, the HDCD logo and High Definition Compatible Digital are registered trademarks. Microsoft and
HDCD are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or
other countries. HDCD system manufactured under license from Microsoft Corporation.