Filter
Top Products
280-8171-00
WXZ466MP 25
English
Auto store
Auto store selects 6 TV stations automatically
and stores each one into preset memory.
If the 6 stations with good reception are avail-
able, stations previously stored in memory re-
main. Only stations with strong reception are
stored into memory.
1. Press the [BAND] button and select the de-
sired TV band (TV1 or TV2).
2. Press and hold the [SEARCH] knob for 2
seconds or longer. The stations with good re-
ception are stored automatically to the preset
channels.
Preset scan
Preset scan allows the user to view each preset
position before it automatically advances to the
next preset. This function is useful for searching
for a desired TV station in memory.
1. Press the [SEARCH] knob.
2. When the desired station is found, press the
[SEARCH] knob again to remain tuned to
that station.
Note:
• Do not press and hold the [SEARCH] knob for 2
seconds or longer. Doing so will trigger the auto
store function and start storing stations into
memory.
Setting the TV area
When you select the TV area (TV reception
area), the TV tuner area setting changes.
1. Press the [ADJ] button to switch to the adjust
mode.
2. Turn the [SEARCH] knob to select “TV
AREA”.
3. Press the [SEARCH] knob.
4. Turn the [A-MODE] knob to select the recep-
tion area.
5. Press the [SEARCH] knob.
6. Press the [ADJ] button to return to the previ-
ous mode.
The above operations are required when a TV
tuner other than TTX7501z is connected.
TV Operations
Setting the TV diver
You can change the reception setting for the TV
antenna connected to the TV tuner.
∗ The factory default setting depends on the TV.
1. Press the [ADJ] button to switch to the adjust
mode.
2. Turn the [SEARCH] knob to select “TV
DIVER”.
3. Turn the [A-MODE] knob to select “ON” or
“OFF”.
● ON:
Sets the diver setting to ON.
● OFF:
Sets the diver setting to OFF.
4. Press the [ADJ] button to return to the previ-
ous mode.
+WXZ466MP-009-ENG 05.9.13, 10:5025