Filter
Top Products
20 WXZ466MP
280-8171-00
English
Common Operations
8. Press and hold the [SEARCH] knob for 2
seconds or longer to store the message in
memory and return to the display adjust
mode.
∗ Press and hold the [BAND] button for 1
second or longer to delete the message. Then
press and hold the [SEARCH] knob for 2
seconds or longer to return the message to
the default setting.
9. Press the [DISP] button to return to the previ-
ous mode.
Setting the method for title scroll
Set how to scroll in CD-TEXT, MP3/WMA TITLE.
∗ The factory default setting is “ON”.
1. Press and hold the [DISP] button for 1 sec-
ond or longer to switch to the display adjust
mode.
2. Turn the [SEARCH] knob to select “AUTO
SCROLL”.
3. Turn the [A-MODE] knob to select “ON” or
“OFF”.
● ON:
Scrolls automatically.
● OFF:
Scrolls just 1 time when the title was
changed or you press and hold the [TITLE]
button for 1 second or longer.
4. Press the [DISP] button to return to the previ-
ous mode.
Dimmer control
You can set the dimmer control.
∗ The factory default setting is “ON”.
1. Press and hold the [DISP] button for 1 sec-
ond or longer to switch to the display adjust
mode.
2. Turn the [SEARCH] knob to select
“DIMMER”.
3. Turn the [A-MODE] knob to select “ON” or
“OFF”.
4. Press the [DISP] button to return to the previ-
ous mode.
Adjust Mode
Anti-theft indicator
The red Anti-theft indicator is a function for
detering theft.
The disc indicator of the [DIRECT] button “2”
blinks.
∗ The factory default setting is “OFF”.
1. Press the [ADJ] button to switch to the adjust
mode.
2. Turn the [SEARCH] knob to select “BLINK
LED”.
3. Turn the [A-MODE] knob to select “ON” or
“OFF”.
4. Press the [ADJ] button to return to the previ-
ous mode.
Adjusting the auxiliary input
sensitivity
Adjust the auxiliary sensitivity when the audio
from an external device is difficult to hear even
after adjusting the volume.
∗ The factory default setting is “MID”.
1. Press the [ADJ] button to switch to the adjust
mode.
2. Turn the [SEARCH] knob to select
“AUX SENSE”.
3. Turn the [A-MODE] knob to select from
“LOW”, “MID” or “HIGH”.
4. Press the [ADJ] button to return to the previ-
ous mode.
Performing a system check
This function verifies the devices hooked up
through CeNET.
1. Press the [ADJ] button to switch to the adjust
mode.
2. Turn the [SEARCH] knob to select “SYS
CHECK”.
3. Press and hold the [SEARCH] knob for 1
second or longer to start the system check.
The digital connection configuration is auto-
matically checked.
When the system check is complete, the dis-
play returns to the previous mode.
+WXZ466MP-009-ENG 05.10.24, 10:3220