Filter
Top Products
21
English
FB275BT / FB275BTB
The same device may connect as both A2DP/
AVRCP and HFP partner. This normally happens
to mobile phone with wireless music streaming
capability. However, using the same device will
cause the A2DP/AVRCP to be disconnected when
there is an incoming call or making a call. User may
need to manually resume playback via audio player
in phone depends on the type of phones. However,
some phones will automatically resume to BT Audio
mode after telephone interrupt.
Please refer chapter “Audio Streaming Opera
-
tions” on page 25 for music streaming functional-
ity.
Please refer “Bluetooth
®
adjustment” on page
29 for other
Bluetooth
®
related adjustment.
Introduction to Bluetooth
®
Wireless Technology
Connecting Bluetooth
®
device
Your device/phone will normally connect auto-
matically to the unit after pairing. However, some
phones will not allow automatic connection to the
unit after pairing; please use the phone to manu-
ally connect to the unit.
If Automatic Connection is enabled in Adjustment
mode, the unit will try to connect to the previous-
ly connected phone when entering Telephone
mode or during power up. Connection can be
established at any Source mode. If connection
is unsuccessful, automatic connection will stop.
Please refer “Automatic connection” on page
30 to enable this feature.
The “ ” indicator will light on upon successful
connection.
Notes:
Auto connection only works for HFP. User may need
to manually connect for A2DP. This will depends on
the
Bluetooth
®
audio player.
Please connect HFP to unit before audio streaming.
It is recommended to use one device at one time
as using 2 different devices in the same time may
affect the normal operation.
Disconnecting Bluetooth
®
device
1. Press and hold the
[
]
button for 1.5 sec
-
onds or longer to disconnect all
Bluetooth
®
devices.
“CLOSING CONNECTIONS” will be displayed
and “ ” indicator lights off.
Notes:
Turning off the unit power and deleting any
Bluetooth
®
device in Adjustment mode will also
disconnect the current device.
Alternatively, user can use the phone to manually
disconnect the device. However some devices will
automatically reconnect once disconnect. Please
refer your device owner's manual for more de-
tails.
Please refer “Compatible Devices” on page 31
to make sure your device is compatible.