Filter
Top Products
18
English
FB275BT / FB275BTB
MP3 Operations
Random mode
There are 3 types of Random mode. When the
[
RDM
]
button is pressed at the first time, the cur
-
rent Random mode will be displayed. Further
pressing the
[
RDM
]
button will switch the Ran
-
dom mode in the following order:
Folder repeat play
This function allows you to play all tracks in the
current folder repeatedly.
1. Press and hold the
[
RPT
]
button for 1.5 sec
-
onds or longer to perform folder repeat play.
“RPT FLDR ON” will be displayed briefly.
2. Press and hold the
[
RPT
]
button for 1.5 sec
-
onds or longer to cancel folder repeat play.
“RPT FLDR OFF” will be displayed briefly.
The “ ” indicator lights in the display when
folder repeat play is enabled.
Note:
This function will cancel other previous special play
-
back functions such as track repeat and Random
mode.
“RDM TRACK”
“RDM FOLDER”
“RDM CARD”
“RDM OFF”
The “ ” indicator lights in the display.
Track random play
This function allows you to play the tracks of cur-
rent folder randomly.
1. Press the
[
RDM
]
button to select “RDM
TRACK”.
Notes:
It will go to next folder after all the tracks in that
folder have been played. However, this will depend
on folder repeat setting.
Any track/folder selection will always perform as
next random track/folder.
Quick random folder play
This function will perform a single jump to a ran-
dom folder but do not affect current Random or
Folder Repeat settings.
1. Press and hold the
[
RDM
]
button for 1.5
seconds or longer to perform quick random
folder play.
To cancel random play
1. Press the
[
RDM
]
button to select “RDM
OFF”.
Folder random play
This function allows you to play all the tracks al-
phabetically in a random folder.
1. Press the
[
RDM
]
button to select “RDM
FOLDER”.
Note:
This function will require some amount of time
depends on the complexity of folder hierarchy.
Always use the folder hierarchy as recommened in
chapter “Folder structure” on page 13 for optimal
performance.
Card random play
This function allows you to play all the tracks of
all the folders in a random order.
1. Press the
[
RDM
]
button to select “RDM
CARD”.
Notes:
This function will require some amount of time
depends on the complexity of folder hierarchy.
Always use the folder hierarchy as recommened in
chapter “Folder structure” on page 13 for optimal
performance.
Any track/folder selection will always perform as
next random track/folder.