Filter
Top Products
9
English
Owner’s Guide
Functions of Remote Control Unit Buttons
6. REMOTE CONTROL
Inserting the Battery
1) Turn the remote control unit upside down,
push the lock in the direction of the arrow,
and pull out the battery holder.
2) Insert the enclosed battery (CR2025) with
the “+” side facing up.
3) Push the battery holder back in securely until
a click is heard.
Notes:
Using batteries improperly can cause them to
explode. Take note of the following points:
•
When replacing the battery, be sure to set the new
battery with the “+” side facing up.
•
Do not short-circuit, disassemble or heat batter-
ies.
•
Do not dispose of batteries in flames.
•
Dispose of spent batteries in the proper place.
C
R
2
0
2
5
1)
3)
2)
Remote Control Unit
Enclosed battery
(CR2025)
Battery holder
Lock
Rear side
Button Tape Mode [ ] Radio Mode [ ]
CD Mode [ ]/CD Changer Mode [ ]
FUNC (POWER) Turns power on, switches between tape, radio, and CD, and turns power off when pressed
for 1 second or longer.
BAND (BAND/
DISC/PROG)
Switches playback direction
and cancels scan play.
Switches reception band. Switches the disc (only in CD
changer mode).
(VOLUME UP)
Turns volume up.
(VOLUME DOWN)
Turns volume down.
(SEARCH DOWN)
REW, APC-REW Preset channel down Search down
(SEARCH UP)
FF, APC-FF Preset channel up Search up
Play/Pause Switches mute on and off. Play/Pause
VISU (VISUAL) Switches the display to monitor.
DISP Displays and switches the spectrum analyzer patterns.
ISR Calls ISR. Calls ISR and stores a chan-
nel when pressed for about 2
seconds.
Calls ISR.
RPT (REPEAT) Repeat None Repeat
EQ (EQ PROG) Calls the EQ USER display.
RDM (RANDOM/
DOLBY NR)
Switches Dolby NR mode on
and off.
None Random
MONI (MONITOR) Switches the monitor on and off.
SCN
(SCAN PS/AS)
Scan Preset scan, stores a station
when pressed for about 2
seconds.
Scan
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
Note:
Functions of the source unit and the remote control unit differ slightly.