Filter
Top Products
This unit can control a separately sold CD
changer to store and play up to 18 CDs.
Note:
•
CD-ROM discs cannot be played.
Listening to a CD
1) Press the FUNC button and select CD
changer mode. Playback starts automatically.
2) Press one of the Disc No. buttons to
corresponding to each CD to select one.
*
The selected CD No. becomes pink in the dis-
play.
Note:
•
If a slot in a magazine is empty, that slot No. does
not appear in the display and cannot be selected.
3) Slide the Up/Down button to (right) or
(left) to select a track (song).
: Selects the next track. (Example: The
third track from the current one is select-
ed by sliding the button 3 times.)
To return to the beginning of the current
track, slide the Up/Down button once
to (left).
: Selects the previous track.
(Example: The third track before the cur-
rent one is selected by sliding the button
1+3=4 times (the first sliding returns you
to the beginning of the current track).)
Notes:
•
After CD No. 6 is played, CD No. 1 is played
again. However, when a CD changer capable of
storing 12 or 18 CDs is connected to the unit, all
CDs in all magazines are played sequentially
(unless the magazine is locked).
•
The empty slot No. is skipped and the next CD is
played.
Fast-forward and fast-backward
1) Slide and hold the Up/Down button to
(right) and (left). The CD fast-forwards
or fast-backwards while the button is being
held.
: Moves forward 3 times faster than normal
play when you slide it for about 1 second
and 30 times faster than normal play
when you slide it for 5 seconds or longer.
: Moves backward 3 times faster than nor-
mal play when you slide it for about 1 sec-
ond and 30 times faster than normal play
when you slide it for 5 seconds or longer.
Note:
•
Slide the Up/Down button to (right) or
(left) for 1 second or shorter to switch the tracks.
2) Release the button when you reach the
desired track to start playback.
Pausing playback
1) Press (center) of the ENT button to
pause playback.
*
“PAUSE” appears in the display.
2) Press (center) of the ENT button
again to resume playback.
Scan play
This function plays the first 10 seconds of all the
tracks on the current CD (track scan) or first 10
seconds of the first track of all the CDs in the CD
changer (disc scan).
1) Press the SHIFT button to select SCN/
RPT/RDM mode.
2) Press the Scan button to start track scan.
Scanning starts from the next track of the cur-
rent one.
Press the Scan button for about 2 sec-
onds to start disc scan. Scanning starts from
the next disc of the current one.
*
becomes pink and or
appears in the display.
*
Turning off the power cancels scan play.
3) Press the Scan button when you reach
the track you want to listen to. Playback
resumes.
Repeat play
This function plays the current track (track repeat)
or the current CD (disc repeat) repeatedly.
1) Press the SHIFT button to select
SCN/RPT/RDM mode.
2) Press the Repeat button to start track
repeat or press it for about 2 seconds to start
disc repeat.
17
22
16
D-SCN
T-SCN
SCN
16
16
22
11
11
11
11
11
11
2116
12
23
English
Owner’s Guide
CD Changer Mode Operations