Filter
Top Products
27
English
Owner’s Guide
again to return to “AUDIO.”
AUDIO : Display becomes black.
VISUAL: The rear vision camera is moni-
tored on the display. (Applicable
only when the rear vision camera is
connected. When it has not been
connected, display becomes black
in radio, CD, or ISR mode.)
4) Press the ADJ button to return to the pre-
vious display.
Adjusting the brightness and tone
of color (when the rear vision
camera is connected)
1) Press the ADJ button to select the CON-
FIGURATION display.
2) Slide the Up/Down button to (down) or
(up) to move the cursor to “DISPLAY.”
3) Slide the Up/Down button to (right) to
select either of BRIGHT, COLOR, or HUE.
Each time you slide the Up/Down button
to (right), the adjustment mode switches
in the following order:
BRIGHT :Adjusts the brightness of the dis-
play.
COLOR :Adjusts the color saturation.
HUE :Adjusts the tone of color. (red is
emphasized ↔ green is empha-
sized.)
4) Press (center) of the ENT button to
select what to adjust.
5) Slide the Up/Down button to (right) or
(left) to adjust the brightness.
11
BRIGHT is selected.
Darken. Brighten.
11
BRIGHT
COLOR HUE
11
11
Adjusting the brightness
11
10
10