Filter
Top Products
16
Sirius Satellite Radio Operation (Continued)
Direct Tuning:
1. Push the
TUNE
knob until “DIRECT” appears in the display.
2. Rotate the
TUNE
knob and select the first digit (0 or 1).
3. Push the
TUNE
knob again.
4. Rotate the
TUNE
knob and select the second digit (1-8).
5. Push the
TUNE
knob again.
6. Rotate the
TUNE
knob and select the third digit (1-9). The tuner will
start playing the station you have selected when the third digit stops
flashing.
TUNE/TRACK/CH
PUSH
SCAN/S-MOD/SETUP
TUNE/TRACK/CH
PUSH
SCAN/S-MOD/SETUP
Preset Sirius Satellite Radio Stations
Programming Satellite Radio Stations: You can program up to 20 Sirius
Satellite radio stations.
1. Select from SR1, SR2, SR3 or SR4 by pushing the BAND button
repeatedly.
2. Tune to the desired radio station (see Sirius Satellite Radio Operation
for more details).
3. Push and hold one of the five STATION RECALL buttons
until a short "beep" is heard. The corresponding preset
button number now appears in the lower right hand
corner of the display.
4. To program additional preset stations, repeat this procedure using the
other STATION RECALL buttons as desired.
BAND W-BND
2
3
4
5
REPEAT
SHUFFLE
INTRO
Recalling Satellite Radio Stations:
1. Select from SR1, SR2, SR3 or SR4 by pushing the BAND button
repeatedly.
2. Push button 1, 2, 3, 4 or 5 to recall a preprogrammed radio
station.
Automatically Recalling Satellite Radio Stations:
1. Select from SR1, SR2, SR3 or SR4 by pushing the BAND button
repeatedly.
2. Push AS/PS button and release
to automatically scan every 5 seconds
the pre-programmed radio stations.
To stop scanning push the
AS/PS
button again.
BAND W-BND
2
3
4
5
REPEAT
SHUFFLE
INTRO
BAND W-BND
MODE AS/PS
M9900DVDS-UM 4/26/06 14:16 Page 16