Filter
Top Products
29
Choose either or by pressing the
COMPUTER 1 or COMPUTER 2 button on the remote controller. Or you can press the INPUT button
on the top control to choose the desired input source.
Before using these buttons, correct input source should be selected through Menu operation as
described below.
1
2
3
When the Auto input function is set to On 1 or On
2 in the Auto setup function, the input signal will be
searched automatically (p.47).
COMPUTER 1
Press the MENU button to display the
On-Screen Menu. Use the Point ▲▼
buttons to select and then press the
Point ► button or the OK button.
Use the Point ▲▼ buttons to select
COMPUTER 1.
When COMPUTER 1 is selected, press
the Point ► button to access the submenu
items. Use the Point ▲▼ buttons to select
the input source and then
press the OK button.
Direct Operation
Menu Operation
OR
Use the Point ▲▼ buttons to select
COMPUTER 2 and then press the OK
button.