Filter
Top Products
28
Press the P-TIMER button on the remote
controller to operate the Count up/Count down
function. Refer to p.54 for detail of Setting for
the P-timer function.
To stop the count time, press the P-TIMER
button.
To cancel the P-timer function, press and hold
the P-TIMER button.
Press the IMAGE button on the remote
controller to select a desired image mode of
the screen. See pages 34, 42 for details.
disappears after 4 seconds.
See the previous page for the description of other
buttons.
Select the screen size (See pages 36-37,
44-45 for details).
black out→ the captured image → normal
→
......
Press the BLANK button on the remote
controller to black out the image. To restore
to normal, press the BLANK button again or
press any button. When the projected image
is captured and is set as User in the Logo
selection (p. 48), the screen changes each time
you press the BLANK button as follows.
When use the MUTE button to release the
Blank function, the mute function can not
be operated at the same time.
Turn on or turn off the Picture in Picture function.