Filter
Top Products
34
Italiano SvenskaDeutsch Nederlands EnglishFrançaisEspañol
REFERENCE
REFERENCE
Mounting the VS-2 video enhancer
For convenience, the VS-2 video enhancer can be mounted on a wall.
Required tools
Required hardware
Wall mounting
For solid wood
For wallboard
-inch (3.5 mm) drill bit
1
8
Use drill size specified
for type of wall anchor
used.
No. 8 x 1½-inch
(S6 x 36 mm)
wood screws
No. 8 x 1½-inch (S6 x 36 mm)
wood or machine screws
(depends on type of wall anchor)
No. 8 (S6)
wall anchor
Install two screws 12 inches apart. Leave
5
/16 inch
(7.9 mm) between wall surface and screw head.
1
Position the VS-2 mounting holes
over the screws so that it is flush
with the wall.
Lower the VS-2 onto the
screws to lock it in place.
2
3
5
/16"
(7.9 mm)
12"
(30.5 cm)