Filter
Top Products
BASIC SYSTEM CONNECTIONS
19
Italiano SvenskaDeutsch NederlandsEnglish FrançaisEspañol
BASIC SYSTEM CONNECTIONS
7 Connect audio source outputs to media center audio inputs
The media center has analog and digital audio inputs for your cable/satellite box, VCR, TV,
and one other source. This step explains how to connect your sources using the analog audio
input connections (Figure 11).
Note: To make higher-quality audio connections, refer to “Using digital audio connections” on
page 27.
You need an RCA stereo audio cable for each source to complete this step. One stereo audio
cable with red and white RCA plugs is supplied with your system.
Note: Make sure the VCR, CBL-SAT, and AUX audio input connections on the media center
match the corresponding VCR, CBL-SAT, and AUX video input connections on the VS-2.
A. Plug one end of an RCA stereo cable into the left and right audio output connectors
on the audio source. Match the white plug to the left (L) output and the red plug to the
right (R) output.
B. Plug the other end of the cable into the left and right audio input connectors on the
media center. Match the white plug to the left (L) output and the red plug to the right
(R) output.
Figure 11
Analog audio connections
AUX
CBL-SAT VCR
TV
CBL•SAT
VCR
AUX
TV