Filter
Top Products
32
OPTIONAL CONNECTIONS AND ADDITIONS
OPTIONAL CONNECTIONS AND ADDITIONS
ItalianoSvenska DeutschNederlands EnglishFrançais Español
Adding audio record/playback equipment
Using a standard RCA stereo audio cable, you can connect external playback and recording
equipment such as CD players and tape recorders to the rear panel of the media center.
• If the equipment does not have right and left output connectors, use a Y adapter to connect
it to the media center. Appropriate cables and adapters are available at most electronics
stores.
• If the component has digital audio connectors (coaxial or optical), you can make digital
audio connections to the media center. Refer to “Using digital audio connections” on
page 27. With either type of digital connection, be sure to use an analog connection, too.
To connect playback equipment
Connect the AUDIO OUT on the playback equipment to the AUX Audio IN connectors on the
media center. Insert the white plug into the L (left) Audio IN connector and the red plug into
the R (right) connector (Figure 23).
Figure 23
AUX input connections
Playback equipment
connector panel
Media center connector panel