Filter
Top Products
OPTIONAL CONNECTIONS AND ADDITIONS
31
O
PTIONAL CONNECTIONS AND ADDITIONS
English FrançaisEspañol
Cables and considerations for further additions
Use standard RCA audio cables, matching the white (or black) connector to the L (left)
channel and the red connector to the R (right) channel. See Figure 28.
If the component is mono, use a Y adapter to connect it to the media center. Appropriate
cables and adapters are available at most electronics stores.
If the component has a digital output use the corresponding digital input beneath the set of
analog (L and R) inputs.
You could also use an optical connection, if the component has one. See Figure 30. You must
identify the optical source using the System/Media Center/Optical Source menu.
Connecting record/playback equipment
The rear panel of the media center provides input (AUX) jacks for listening to and output
(Audio OUT) jacks for recording to a cassette tape deck.
Figure 28
Record/playback
connections
Media center
Record/playback component
Audio cable
for playing
a tape
Audio cable
for recording
to tape
Rear panel
Connecting other playback equipment
Other playback components such as an audio CD changer can be connected to the AUX or
other unused inputs on the rear panel of the media center.
Figure 29
AUX input connections
CD changer or other playback equipment
Audio cable
Media center