Filter
Top Products
23 of 36
5.0 System Setup
B
Stereo Select Input Set-up
Select each Input that has a source connected.
C
Stereo Select Output Set-up
Select each Output to be used (1/2 or Auxout).
• For Input Vol Lvl
• For Input Bass Adj and Input Treb Adj
Adjust the value to +/-6 dB in increments of .5 dB.
• For AGCEnable
Choose N (no) or Y (yes).
Note: AGC defaults to N. AGC is recommended for use with low-level
sources (i.e., microphone with low sensitivity).
• For Output Vol Lvl
• For Output Bass Lvl and Input Treb Lvl
Adjust the value to +/-6 dB in increments of .5 dB.
• For Out 1/2 Input Sel
• For Auxout Input Sel
Selects which inputs are
routed to the Aux output.
Input TrackWP tracks to
A/B switch on user interface.
Note: If TrackWP is selected and a user interface is installed, the input
(A/B) selected on the user interface will be displayed.
5.0 Setup.fm Page 23 Monday, February 12, 2007 8:54 AM