Bose 40326 Speaker System User Manual


 
!!
English FrançaisEspañol
IMPORTANT SAFETY INSTRUCTIONS
1. Read these instructions – for all components before
using this product.
2. Keep these instructions – for future reference.
3. Heed all warnings – on the product and in the owner’s
guide.
4. Follow all instructions.
5. Do not use this apparatus near water or moisture – Do
not use this product near a bathtub, washbowl, kitchen sink,
laundry tub, in a wet basement, near a swimming pool, or
anywhere else that water or moisture are present.
6. Clean only with a dry cloth – and as directed by Bose
Corporation. Unplug this product from the wall outlet before
cleaning.
7. Do not block any ventilation openings. Install in
accordance with the manufacturer’s instructions – To
ensure reliable operation of the product and to protect it
from overheating, put the product in a position and location
that will not interfere with its proper ventilation. For example,
do not place the product on a bed, sofa, or similar surface
that may block the ventilation openings. Do not put it in a
built-in system, such as a bookcase or a cabinet that may
keep air from flowing through its ventilation openings.
8. Do not install near any heat sources, such as radia-
tors, heat registers, stoves, or other apparatus
(including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two blades
with one wider than the other. A grounding-type plug
has two blades and a third grounding prong. The
wider blade or third prong are provided for your
safety. If the provided plug does not fit in your outlet,
consult an electrician for replacement of the obsolete
outlet.
10. Protect the power cord from being walked on or
pinched, particularly at plugs, convenience
receptacles, and the point where they exit
from the apparatus.
11. Only use attachments/accessories specified by the
manufacturer.
12. Use only with the cart, stand, tripod,
bracket or table specified by the manu-
facturer or sold with the apparatus.
When a cart is used, use caution when
moving the cart/apparatus combination
to avoid injury from tip-over.
13. Unplug this apparatus during lightning storms or
when unused for long periods of time – to prevent !
damage to this product.
14. Refer all servicing to qualified service personnel. Ser-
vicing is required when the apparatus has been dam-
aged in any way: such as power-supply cord or plug is
damaged; liquid has been spilled or objects have
fallen into the apparatus; the apparatus has been
exposed to rain or moisture, does not operate nor-
mally, or has been dropped – Do not attempt to service
this product yourself. Opening or removing covers may
expose you to dangerous voltages or other hazards. For help
in solving problems, contact Bose Customer Service. Refer
to the address sheet included with the system.
15. To prevent risk of fire or electric shock, avoid over-
loading wall outlets, extension cords, or integral
convenience receptacles.
16. Do not let objects or liquids enter the product – as
they may touch dangerous voltage points or short-out parts
that could result in a fire or electric shock.
17. See product enclosure for safety related-markings.
18. Use proper power sources – Plug the product into a
proper power source, as described in the operating instruc-
tions or as marked on the product.
Information about products that generate
electrical noise
If applicable, this equipment has been tested and found to
comply with the limits for a Class B digital device, pursuant
to Part 15 of the FCC rules. These limits are designed to
provide reasonable protection against harmful interference in
a residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause
harmful interference to radio communications. However, this
is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful
interference to radio or television reception, which can be
determined by turning the equipment off and on, you are
encouraged to try to correct the interference by one or more
of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and
receiver.
Connect the equipment to an outlet on a different circuit
than the one to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician
for help.
This product complies with the Canadian ICES-003 Class B
specifications.