Filter
Top Products
CARE AND MAINTENANCE
17
!!
C
ARE AND MAINTENANCE
English FrançaisEspañol
Customer service
For additional help in solving problems, contact Bose
®
Customer Service. Refer to the
address sheet included with the system.
Product specifications
Power rating USA/Canada..................120VAC~ 50/60 Hz 300W!
International...................220VAC-240VAC~ 50/60 Hz 300W!
Japan.............................100VAC~ 50/60 Hz 300W
Dimensions Satellite speaker............8.85"H x 5.79"W x 3.83"D !
(22.5 cm x 14.7 cm x 9.7 cm)
Acoustimass module.....8.58"H x 6.82"W x 16.74"D !
(21.8 cm x 17.3 cm x 42.5 cm)
Control pod ...................2.46"DIA x 1.12"H !
(6.3 cm x 2.9 cm)
Weight Satellite speaker............1.9 lb (0.85 kg)!
Acoustimass module.....18.3 lb (8.3 kg)!
Control pod ...................0.46 lb (0.21 kg)
Finish Acoustimass module.....Scratch-resistant, satin-finished vinyl!
Satellite speakers ..........Painted polymer finish
Computer system recommendation
• 1 GHz, minimum, Pentium processor or equivalent
• 256 MB RAM, minimum
• USB 2.0
• Microsoft Windows
®
XP or later, or Mac OS
®
X 10.4.6 or later
• A compatible 5.1 surroundsound decoder residing on your computer
I’m hearing clicks, pops,
and abnormal sounds on
my computer.
• This may be caused by connecting the speaker system to your computer through a USB
hub. Disconnect the Companion
®
5 system USB cable from the hub and plug it into a
USB jack on your computer.
Sound from speakers is
not loud enough.
• Increase the volume on your computer or other sound source.
System sounds “tinny,”
too much treble.
• Make sure right (R) and left (L) speakers are on the correct sides of your computer moni-
tor. Check the L and R markings on the speaker cord behind each speaker.
• Make sure Bass Compensation control on the Acoustimass
®
module is not turned fully
counterclockwise.
One satellite speaker
does not play or sounds
distorted.
• Check all connections between the satellite speakers, control pod, sound source and the
Acoustimass module. Make sure all plugs are fully inserted into the jacks on the module.
• Make sure the speaker cord plug on the speaker in question is fully inserted into its jack
on the Acoustimass module.
• To determine if the problem is in the sound source or the Acoustimass module, connect a
different sound source to the control pod. If the Companion 5 speaker system operates
properly, the problem is in the original sound source. If the problem remains, then the
problem is in the Acoustimass module.
• Check balance levels on your sound source.
Problem What to do