Filter
Top Products
LE10 Radio Receiver Operation | en 17
Bosch Security Systems User Manual F.01U.278.517 | V2.0 | 2012.11
– Relay 2 switches on permanently until the battery is
replaced and the transmitter is activated again.
Device behavior when the battery is replaced in a transmitter
– The green LED stays permanently on.
When the transmitter is activated:
– The red LED stops blinking every 10 seconds, and lights up
permanently for 10 seconds.
– Relay 1 switches on for 10 seconds.
– Relay 2 switches off.
6.3 Dementia (mode 3)
6.3.1 Activation of a MIYS37L Wristband Transmitter
Device behavior
– The green LED stays permanently on.
When a MIYS37L transmitter is activated:
– The red LED lights up permanently for 7 seconds.
– Relay 1 switches on for 7 seconds.
– 1 second after Relay 1, Relay 2 switches on for 3 seconds.
The procedure is repeated if a MIYS37L transmitter is activated
again.
Device behavior when a MIYS37L transmitter has a low
battery
– The green LED stays permanently on.
When the MIYS37L transmitter is activated:
– The red LED blinks twice for 2 seconds and then lights up
permanently red for 5 seconds.
– Relay 1 and Relay 2 behave as above.
NOTICE!
In normal mode 2, the red LED is deactivated regarding battery-
low indication and will not blink every 10 seconds.