Filter
Top Products
LE10 Radio Receiver Programming | en 15
Bosch Security Systems User Manual F.01U.278.517 | V2.0 | 2012.11
5.5 Program a door address in modes 3 or 4
You can program a door address stored in a MIYS37L Wristband
Transmitter with Locating function, in modes 3 or 4.
To start programming
– Press button T1 min. 1 second and max. 3 seconds.
Device behavior
– The green LED stays permanently on.
– The red LED blinks slow for max. 30 seconds.
– Activate the S37L Wristband Transmitter, which you desire
to match, before the end of the 30 seconds.
– Upon activating the transmitter, the green LED and the red
LED blink alternating quick for 6 seconds.
This indication confirms that the door address in the MIYS37L
Wristband Transmitter is matched in the LE10 Radio Receiver.
5.5.1 Programming in modes 6 or 7
It is neither possible nor necessary to program a transmitter in
modes 6 or 7 (Open Receiver).
NOTICE!
A door address must be stored beforehand in a MIYS37L
Wristband Transmitter with Locating function.
NOTICE!
Only one door address of a MIYS37L Wristband Transmitter
with Locating function can be matched in the LE10 Radio
Receiver.
CAUTION!
When a new door address stored in a MIYS37L Wristband
Transmitter is programmed, it overwrites the current door
address.