Filter
Top Products
6
Press the button indicating the oppo-
site direction,
or / to stop tape
winding.
Changer mode (optional)
Select CD
Up
Down
Select track
>> Up: press briefly
CUE - fast forward (audible):
hold button down.
<< Down: press two or more
times briefly
Repeat track: press once
briefly.
REVIEW - fast reverse
(audible) - hold button
down.
Additional rocker switch functions:
For additional settings use
AUD ;
DSC-MODE 4
Important: The corresponding func-
tion must be active.
: SRC (Source)
Press button briefly to select the oper-
ating mode (tuner, cassette, changer
or Aux-in). The active mode will ap-
pear in the display.
; AUD
Treble and bass adjustment
You can store different settings for the
FM, AM, cassette, CD-changer mode
or Aux-in.
Setting the tone:
• Select the operating mode.
Press AUD once and use the rocker
switch to set the tone.
Treble +
Treble -
<< Bass -
>> Bass +
For Fader and balance adjustment:
press AUD twice.
Fader front
Fader rear
<< Balance left
>> Balance right
The selected values will appear in the
display. The last setting is stored au-
tomatically.
Switching AUD off: Press the button
again briefly.
If you do not make any adjustments to
the tone within 8 seconds, the AUD
mode will quit automatically.
< LD: Loudness
Loudness boosts the bass frequency
at low volume.
Loudness on/off: Press LD briefly.
“LD” will appear when this setting is
active.
Refer to the section on DSC program-
ming to adjust Loudness to different
levels.
=
DIS - Clock display
This unit is equipped with an internal
clock.
Display priority
To alter the display priority, press
until you hear a beep. Repeat this pro-
cedure until the desired display ap-
pears.
Temporary display change
Press
briefly as many times as
needed to show the desired informa-
tion for a few seconds.
Radio mode
Press this button to switch between
the clock, the station name and the
frequency.