Blaupunkt CM 168 CD Player User Manual


 
20
DSC programming
The car radio has been equipped with DSC
(Direct Software Control) to allow you to
customize certain programmable, basic
settings to suit your personal needs and
preferences and then store them.
The basic settings for this car radio were
made at the factory.
In the following you can find an overview of
these settings, so that you can always re-
set to them if desired.
If you wish to alter any of the programming,
press DSC.
“MENU
/ ” will temporarily appear in the
display.
Use the
/ buttons of the rocker switch
to select the function you wish to change.
The display will show you the setting you
have selected. Press the << >> buttons of
the rocker switch to change the settings and
exit the current mode. Confirm the setting
you have selected by pressing the DSC
button.
/ Select function
<< >> Adjust/recall setting
LOUDNESS Loudness boosts the bass
frequencies at low volume.
LOUD 1 - Low boost
LOUD 6 - Max. boost
BAS CENT Bass Center Frequency Ad-
justment.
Adjusts the mid-range fre-
quency to the specific
equipment in the vehicle
(50 or 100 Hz)
STA NAME Allows you to name up to
30 radio stations based on
their frequency.
SENS LO Adjusts seek tuning
sensitivity.“LO” stands for
local reception.“DX” stands
for distant reception.
Select “LO” if you want to
receive strong stations in
the local area, select “DX” if
you want to tune into weak-
er stations which are further
away.
CDC NAME Names CDs. A maximum of
99 CDs can be given names
of up to 7 characters.
CLOCK 12 Switches between 12-h and
24-h clock display.
CLOCKSET Sets the clock manually.
Press << >> to select
hours/minutes. Press
/
to adjust the flashing value.
TIMER 1 The radio will automatically
switch to a station you have
selected at the time you
program.
TIMER 2 You can also program the
unit to go to a second sta-
tion at a programmed time.
ON VOL Sets the turn-on volume.
Press << >> to adjust the
turn-on volume as desired.
TOM
ON/OFF Turn-on-message.
You can enter a message
of up to 40 characters
which appears in the dis-
play when you switch the
unit on.