Filter
Top Products
ADVANCED SETUP FEATURES
WARNING -
The following describes the advanced features of the Preamplifier Tuner. Since changing
some of these functions may cause severe effects such as no sound or no remote control operation, we suggest
you leave this menu disabled (hidden) for normal operation. If you are unsure of what you are changing
DO NOT
perform any advanced operations. These features may be activated by simultaneously pressing the SLEEP,
DOWN, and UP buttons on the front panel of the Preamplifier Tuner. It will be assumed the user of these
advanced features is already familiar with how to navigate and adjust parameters in the Preamplifier Tuner's
MENU system. An Advanced Setup Flow Chart has been supplied at the end of this manual as a visual aid for the
menu’s navigation.
Note - if you have enabled the Advanced Visible option then you can return to this menu to hide the advanced
visible selection by simultaneously pressing the SLEEP, TUNE-, and TUNE+ buttons and selecting Hidden.
MISCELLANEOUS SETUP
Configuration will allow you to set a maximum volume level and change remote control ID codes for use in a
multi-zone application.
Max Level -
max level allows you to set a maximum volume level. This is very useful if you are using speakers or
amplifiers that can’t handle the output level from your Preamplifier Tuner or if you simply wish to limit the volume
that can be achieved using normal front panel or remote operation.
Max Level may be set from -74 dB to + 8 dB (default).
WARNING
-
If you set this level too low, the Preamplifier Tuner may appear broken (no sound).
Product ID -
Each transmitted IR message from your remote control includes a Product ID code that is used to
distinguish it from other devices. Product ID codes allow multiple B&K products to be controlled from the same IR
remote control. From the factory, your Preamplifier Tuner is to use Product ID code 2. There are 16 valid Product
ID’s available for this product. Make sure you are in the ADVANCED SETTINGS menu.
WARNING - If you change the product ID code in the Preamplifier Tuner without having the capability to
generate this new IR code, your Preamplifier Tuner will no longer have IR control capability. If this feature
is to be implemented, we recommend our AV5.1 or AV7.1 preprogrammed & learning remote control. The
AV5.1 / AV7.1 has the capability to generate messages using these 16 product ID codes.
POWER ON TITLES
When you turn your Preamplifier Tuner on it displays three lines of text on the front panel’s alphanumeric display.
You can change two of these lines of text to a personalized message.
to
to
24
P/N 13010 REV 0005