Filter
Top Products
USING FULL RANGE SPEAKERS
Connect the Preamplifier Tuner’s outputs to your external amplifier(s) or powered speakers.
Shown below is a typical Preamplifier output setup for use with large speakers
:
Note: the use of a sub woofer is optional.
SUB output -
Connect an RCA cable from the Preamplifier Tuner’s SUB output. If your subwoofer does not
contain its own amplifier you will need to purchase an external B&K or other power amplifier. Connect the
Preamplifier Tuner’s SUB output to the audio input of the external amplifier. Connect the external amplifier’s
speaker output to your subwoofer. If you prefer to use your subwoofer’s internal crossover, connect to the
Preamplifier Tuner’s Mono output.
9
P/N 13010 REV 0005
POWERED
SUBWOOFER
Front Right Front Left
PLUSMINUS
LEFT SPEAKER OUTPUT
PLUSMINUS
LEFT INPUTRIGHT INPUT
Power Amplifier
MONO
L+R
HIGH
PASS
FULL
RANGE
SUB
PREAMP OUTPUTS
RIGHT SPEAKER OUTPUT
or