Filter
Top Products
1. Headphone Jack - Headphones having a standard ¼” (6.3mm) stereo plug can be connected to the
headphone output.
2. Source Selector - Turning the selector clockwise or counterclockwise will cycle through the available
inputs. Available inputs are V1, V2, TV, DVD, CD, SAT, TAPE, FM and AM.
3. Front panel buttons -
4. Display - The receiver display contains a 16 character display. It will display current status of the receiver
and any changes being performed.
5. Main power switch - Removes all power to the receiver. Normal operation of the receiver requires the
power switch to remain on. Use the ON/STANDBY button for daily on and off of the receiver. ON/STANDBY
places the unit in standby mode that allows turning back on with the remote control. Only turn the receiver off
with the main power switch when not using the receiver for an extended period of time.
6. Volume control - Turning the volume control clockwise increases the volume level, counterclockwise
decreases the volume level. The volume knob is also used to change other receiver settings.
FRONT PANEL DESCRIPTION
10
AVR507 S2 Receiver
DVD DTS-ES MOV 7
B&K COMPONENTS, LTD.
ON/STANDBY PRESET
ENTER
MODE MENUDOWN UP
MASTER
POWER
AUDIO / VIDEO RECEIVER
AVR507
S
2
1
2
3 4 5 6
ON/STANDBY
Toggles the receiver in and out of standby mode, (ON or OFF).
PRESET
Cycles through audio presets for instant preset recall.
ENTER
Confirm Selection. Presets, menu options, unit status.
DOWN & UP
Steps through audio options or menu selections when in the menu system.
Allows AM/FM tune - (down) or tune + (up).
MODE
Steps through audio modes
MENU
Enters into and out of the menu system.