You can trim away a section of a recording.
Simply choose a point in the recording and
specify whether you wish to delete the
section of the recording before or after this
point. You cannot delete a section in the
middle of the recording.
To trim a recording …
> Press V MEM* then the green button
to bring
up the hard disc recorder’s main menu.
HARD DISC CONTENT is already highlighted.
> Press GO to bring up the menu.
> Press
to highlight the recording you wish to
trim.
> Press the green button to bring up the EDIT
menu.
> Press
to highlight TRIM and press GO. The
selected recording is paused at the point where
you left off last the time you viewed it.
> Press the green or yellow button to cue through
the recording to the point you wish to trim from,
and press STOP to pause playback at this point.
> To be able to trim away the beginning of the
recording, up to the pause, press
. To be able
to trim away the end of the recording, from the
pause, press
.
> If you change your mind, press
or to cancel
the trim function. Or …
> Press the yellow button to confirm. The recording
is trimmed, and the times on the screen –
elapsed time and total time of the recording – are
changed accordingly.
Trim a recording
Split one recording into two at a point of your
choice.
Trim a recording.
trim to start trim to end
0:12 PAUSE 1:34
split
0:12 PAUSE 1:34
29
*NOTE! On some Beo4 remote controls, the V MEM
button is called V TAPE.