Bang & Olufsen HDR 2 CD Player User Manual


 
We recommend that you copy your most
important recordings to a recorder connected
to the hard disc recorder, such as a DVD
recorder.
To copy a recording …
> Press V MEM* then the green button to bring
up the hard disc recorder’s main menu.
HARD DISC CONTENT is already highlighted.
> Press GO to bring up the menu.
> Press
to highlight the recording you wish to
copy.
> Press the green button to bring up the EDIT
menu.
> Press
to highlight EXTERNAL COPY and press
GO
.
If the external recorder is from Bang & Olufsen, or
if you have a Bang & Olufsen DVD Controller, the
hard disc recorder starts the external recorder and
plays the selected recording from the beginning.
Otherwise, you must switch the external recorder
on and start recording manually. The main menu
appears briefly on the screen, with the message
EXTERNAL COPY IN PROGRESS and an indication
of the time remaining. After a few seconds, the
current recording is shown.
To stop copying to the external recorder …
> Press V MEM* then the green button
to bring
up the hard disc recorder’s main menu.
HARD DISC CONTENT is already highlighted.
> The main menu appears on the screen, with the
message EXTERNAL COPY IN PROGRESS and an
indication of the time remaining.
> Press the yellow button to stop the external
copy.
When copying is complete, the hard disc recorder
switches both itself and the external recorder
to standby. If your external recorder is not from
Bang & Olufsen, or you do not have a
Bang & Olufsen DVD Controller, you must
switch the external recorder off manually.
Copy to an external recorder. While a recording is
being copied to an external recorder, you cannot
play recordings on the hard disc recorder.
Copy to an external recorder
MENU
HARD DISC CONTENT
TIMER PROGRAMMING
TIMER INDEX
SETUP
stop
EXTERNAL COPY
IN PROGRESS
REMAINING TIME 1:35
31
*NOTE! On some Beo4 remote controls, the V MEM
button is called V TAPE.