Filter
Top Products
TV LIGHT RADIO
DTV DVD CD
V MEM RECORD A MEM
7 8 9
4 5 6
TEXT
0
MENU
1 2 3
LIST EXIT
STOP
GO
The Beo4 remote control included with your
television gives you access to all functions.
When a function is in use, you are informed
via displays on Beo4, on the recorder or on
the television screen.
When switched on from standby, the hard
disc recorder takes up to 35 seconds to start
up. During this time, you can use the menu
system, but you can neither play recordings
nor make new recordings.
Switch on the hard disc recorder and begin
playback of a recording.
On some Beo4 remote controls, the V MEM
button is called V TAPE
Press twice to start a manual recording of the
selected source, such as TV
Enter data in on-screen menus, select a program
number, and enter a point in time to step to in a
recording
Move through menu options. During playback,
skip forward or backward in a recording one
minute at a time. Step between frames while
playback is paused
Enter data in on-screen menus. Step between
recordings during playback
Accept and store instructions and settings. Press
and hold to view the recordings you have stored*
Go back one menu level. Pause an on-going
program. Press to pause playback of a recording,
and press again to stop playback completely
The Beo4 display window shows the source you
have selected
Cue backward during playback or replay
Cue forward during playback or replay
Protect a recording from being deleted
Play a recording or replay an on-going programme
slowly. Start recording a programme
Return to the recorder’s main menu from any sub-
menu. Remove playback information from the
screen
Adjust sound volume; press in the middle to mute
the sound
Switch the recorder and the television to standby
V.MEM
V.TAPE
EXIT
•
V MEM
RECORD
0
– 9
GO
STOP
5
*NOTE! This feature is not available with
all televisions.