Bang & Olufsen HDR 2 CD Player User Manual


 
Use connected video equipment with Beo4
The built-in Peripheral Unit Controller
acts as an interpreter between video
equipment connected to the hard
disc recorder, such as a set-top box,
and the Beo4 remote control.
You can use the Beo4 remote control
to gain access to the channels and
functions offered by your equipment.
Some functions are available via Beo4
when you switch on the equipment.
Additional functions are available
through a Peripheral Unit Controller
menu that you bring up on the
screen.
For instruction in the various
functions offered by your equipment,
please refer to the product’s own
user’s guide.
For further information about
supported equipment, contact your
Bang & Olufsen retailer.
Buttons on the remote controls included with
your equipment may not match those on
Beo4. To see which Beo4 buttons activate
specific services or functions, bring up the
Peripheral Unit Controller menu on the
screen.
Press V MEM and then the
yellow button to switch on
connected equipment
Press MENU, then GO to bring
up the Peripheral Unit Controller
menu
Press the number button that
activates the function you want,
or …
… press one of the coloured
buttons to activate a function
Example of a Peripheral Unit Controller menu –
The Beo4 buttons are shown to the left on the
menu, and the functions they control are shown
to the right. The menu may also list buttons on
the remote control included with your connected
equipment.
Peripheral Unit Controller menu
V MEM
MENU
GO
1
9
GUIDE
MENU
TEXT
INFO
WIDE
1
2
3
4
5
GUIDE
MENU
TEXT
INFO
WIDE
1
2
3
4
5
34