Filter
Top Products
TIMER
Indicates that a timed recording has been
programmed into the recorder.
TIMER remains on during standby, and flashes
if a timer recording can not be executed.
RECORD
‘Recording in progress’ indication.
RECORD flashes if a manual recording can not be
executed for some reason – for example, if there
is a conflict with a timed recording.
REPLAY
The hard disc recorder allows you to ‘pause’ the
current programme if, for example, you wish to
take a short break, and replay the programme later.
REPLAY indicates that the current source, such as
V.TUNER, is being replayed from the three-hour
buffer on the hard drive.
For further information about how to replay an
on-going program, refer to the chapter ‘Pause
and replay an on-going program’ on page 20.
• (Standby indicator)
The indicator shines red when you switch off the
recorder. The indicator shines green when the
recorder is in use. The indicator flashes red and
green if the recorder is overheating.
Displayed information and menus
The display on the recorder informs
you about the current status of the
recorder.
It tells you if you are replaying an
on-going program, if there are timed
recordings waiting to be executed,
and if a recording is in progress.
If two recordings overlap or if a
recording can not be executed,
this is indicated as well.
Operation of the hard disc recorder is
guided by on-screen menus accessible
via the main menu. In the menus,
move the cursor from item to item.
For each item, information can be
keyed in directly or you can browse
through the options available.
For further information, refer to the
chapter ‘On-screen menus’ on page 42.
TIMER RECORD REPLAY
6