Filter
Top Products
System settings
To customise the navigation functions to your own
needs, you can change several settings.
☞
In the main control, select “Settings”.
:
The “System settings” menu is displayed.
The following information screens are available:
Speed
In the “Speed” menu, you can configure the following settings:
Speed correction
The navigation radio uses an average cruising speed to calculate the remaining travel
time and the estimated time of arrival. If required, you can adapt this speed to your
actual average speed.
However, we do not recommend you deviate significantly from the standard value of
100%.
☞
Move the cursor to the value after “Correction”.
☞
Press the right rotary control.
☞
Set the required speed correction.
☞
To save the setting press the right rotary control again.
Speed limit
Use this value to specify the vehicle speed at which a speed warning should be output.
☞
Move the cursor to the value after “Limit (mph):”.
☞
Press the right rotary control.
☞
Set the required speed.
☞
To save the setting press the right rotary control again.
Activating/deactivating speed warning:
If speed warning is activated, each surpassing of the set speed limit triggers a warning
sound and a warning appears on the screen.
☞
Move the cursor to the option after “Limit:”.
☞
Press the right rotary control to choose between “On” and “Off”.
✎
If the speed warning is activated, a warning sound is triggered each time the set
speed limit is exceeded and a warning appears on the screen.
NAVIGATION
52
System settings
Guidance screen
Dyn. route sett.
Language
Speed