Audio-Technica p51857_1800 Headphones User Manual


 
System Features (dual-channel)
Two completely independent receiver channels in a single unit, for simultaneous
operation of two microphones
True Diversity operation for resistance to multi-path interference and dropouts
UHF reception with 996 frequencies selectable in 25 kHz steps
Automatic frequency scanning for easy selection of open channels
Tone Lock™ squelch system eliminates interference when transmitter is off
Two independent balanced outputs
Headphone monitor output with independent level control
Battery fuel-level indicators on transmitters and receiver
Soft-touch controls for easy frequency selection
LCD frequency and battery status display with backlight on receiver and transmitters
Antenna and AF Peak LED indicators
Dual-channel receiver can operate in single-receiver mode to extend battery life
when only one audio channel is required
Compact dual receiver is easy to mount on a camera
Transmitters operate in low or high transmission modes to conserve
battery life/maximize power
Easy, user-friendly operation
Clear, natural sound quality
Powered by AA batteries or by external 12V DC power (not included)
System components of the 1800 Series and 3000 Series UHF wireless systems
can be used interchangeably*
* NOTE: The 1800 Series offers operating frequencies in 25 kHz steps, while the 3000 Series
offers operating frequencies in 125 kHz steps. This means that not every frequency
selectable on the 1800 Series components will be selectable on the 3000 Series components.
Set each transmitter-receiver pair to identical frequencies.
4