Filter
Top Products
14 InfraStruXure System - Installation and Start-Up
Connect Utility Conductors to the PDU
Electrical Hazard: A licensed electrician must connect input conductors to the PDU!
Access the PDU Main Input switch
1. Open the back doors of the PDU, unlock the top, smaller door, using the provided red key.
2. Loosen the two screws holding the larger, hinged door in place.
Attach conduit to the PDU for the input conductors
1. Remove the rectangular gland plate by loosening the captive screws, using a Phillips or standard
screwdriver:
For wiring under a raised floor: Remove the plate in the floor of the PDU.