Filter
Top Products
MULTITASKER
400-0443-004
20
8.3 NO DISPLAY
Cause 1: The source has a problem.
Solution: Check the source and make sure
that there is a signal present and all
source connections are correct. If
the source is working and there is
still no display, see Cause 2.
Cause 2: Signal is bad or missing.
Solution 1: Make sure the input is connected to
the TP transmitter. If there is still no
display, see Solution 2.
Solution 2: Bypass the MT115-111 and TP
transmitter and connect the output of
the source directly to the monitor. If
the display is good, then call
ALTINEX at (714) 990-2300. If there
is still no display, see Cause 3.
Cause 3: Cable connections are incorrect.
Solution: Make sure the cables are properly
connected. Also, make sure that the
continuity and wiring are good. If
there is still no display present, see
Cause 4.
Cause 4: The display has a problem.
Solution: Make sure the display is powered
applied and turned on. If there is still
no display, please call ALTINEX at
(714) 990-2300.
ALTINEX POLICIES 9
9.1 LIMITED WARRANTY/RETURN POLICIES
Please see the ALTINEX website at
www.altinex.com for details on warranty and
return policies.
9.2 CONTACT INFORMATION
ALTINEX, Inc.
592 Apollo Street
Brea, CA 92821 USA
TEL: 714 990-2300
TOLL FREE: 1-800-ALTINEX
WEB: www.altinex.com
E-MAIL: solutions@altinex.com