Filter
Top Products
MULTITASKER
400-0443-004
16
24. [RMG]
This command deletes one or all groups.
Command Format: [RMGk]
Gk = Group ID (k = # from 1-8, * for all)
Example:
Remove all cards from G52 by sending [RMG5].
The system will return the following feedback:
[G5=0]
Example 2:
Remove all cards from all groups, effectively
deleting all groups, by sending [RMG*]. The
system will return the following feedback:
G1-G8: EMPTY
25. [RD]
This command reads and then displays the
members in a group.
Command Format: [RDGk]
Gk = Group ID (k = # from 1-8)
Example:
C2, C4, and C6 make up G5. Read the member
data for G5 by sending the command [RDG5].
The system will return feedback as follows:
[G5=C2C4C6]
The feedback shows G5 and then the cards that
make up G5. In this case, G5 includes C2, C4,
and C6.
7.3 SUMMARY OF COMMANDS
Basic Commands
1) [VER] Display firmware version
2) [C] Display card status
3) [CnS] Save card settings
4) [..S] Save current setting
5) [CLR] Reset card to defaults
6) [TEST] Test internal memory ICs
7) [HELP] Display available commands
Feedback Commands
8) [FBD] Feedback delay on/off
9) [?] Display system cards
10) [?C] Display card information
11) [STA1] Auto-feedback on
12) [STA0] Auto-feedback off
Card Commands
13) [EQ] Select equalization adjustment
14) [EQ=] Set equalization level
15) [GAIN] Select video gain adjustment
16) [GAIN=] Set video gain level
ID Commands
17) [RSI] Reset Card IDs to defaults
18) [SIDn] Set all Card IDs
19) [SIDnCi] Set one Card ID
20) [SID+] Set all Card IDs to an offset
21) [RSN] Display card slot number
Group Commands
22) [WR] Add card(s) to a group
23) [RMC] Remove card(s) from group
24) [RMG] Delete group
25) [RD] Display group members