Alpine DVA-5205E CD Player User Manual


 
69
Functions of remote control unit buttons
Note: Operation may not be accepted depending
on the type of disc and the playback
conditions. At such a time the following
mark is displayed on the screen:
9
RPT Button ( P19)
Repeat playback.
p
POWER Button ( P10)
Turns the power ON and OFF.
NTSC/PAL Button ( P11)
Press and hold for 5 seconds to
change between NTSC and PAL.
q
DVD/AUDIO Switch ( P8)
Used to switch between DVD and
Audio operation.
w
GO TO Button ( P16, 17, 18)
Used to go directly to start of selec-
tion.
TITLE Button ( P12, 21)
Press and hold for 2 seconds to
display the Title Menu.
e
RTN Button ( P16, 17, 18, 25, 27,
29, 31, 33, 35, 37, 39, 41, 43, 44, 45,
46, 47, 49, 50, 51, 53, 55)
Used to return the selection screen
just prior to the present screen.
V.OUT Button ( P23)
Used to switch between Video and
Audio output to the rear monitor.
r
.. / ..: Button ( P15)
Used for Pause and Frame-by-Frame
playback.
t
Button ( P13)
Used to stop playback.
y
A.PROC Button ( P40, 41, 43, 44,
45, 47, 49, 50, 51, 53, 55)
Used to summon the processor
control screen when connected with
the Digital Audio Processor.
BAND Button ( P41, 52)
Press and hold for 2 seconds to switch
the menu screen when controlling the
Digital Audio Processor.
u
SUB T. Button ( P20)
Press and hold for 2 seconds to
change the subtitles.
i
–ON/OFF Button ( P21)
Press and hold for 2 seconds to turn
the subtitles ON and OFF.
o
ANGLE Button ( P20)
Press and hold for 2 seconds to
change the angle.
;
CLR Button ( P16, 17, 18, 27)
Remove numbers (one character at a
time) that have been selected and
input.
Press and hold for 2 seconds. All the
characters which were selected and
input are erased.
a
AUDIO Button ( P19)
Press and hold for 2 seconds to
change the audio output.
s
10-Key Pad ( P11, 13, 16, 17, 18,
21, 25, 27, 28)
Used to input numbers.