Filter
Top Products
12
Playing discs
Playing discs
Caution
DVD
CD
Video CD
DVD
Video CD
Press
“
”.
Playback starts.
• If a menu screen appears
On DVDs and video CDs with playback control
(PBC), menu screens may appear automati-
cally. If this happens, perform the operation
described below to start playback.
Note: For many discs, the menu screen can also
be displayed by pressing “MENU” or “TITLE”
(for at least 2 seconds).
• With some DVDs, certain operations
are disabled. Such operations are
not possible on such DVDs.
• The DVD functions described in this
manual are not supported by all
DVDs. See the individual DVDs
instructions for details on the
features supported.
• Fingerprints on a disc may
adversely affect playback. If a
problem occurs, remove the disc
and check for fingerprints on the
playback side. Clean the disc if
necessary.
• When using the remote control, be
careful to press one button at time.
Pressing multiple buttons at the
same time may cause erroneous
operation.
• Even if you switch the power or the
Ignition Key to OFF during playback
or change the video source,
playback will continue from the point
where it stopped when the power is
turned ON again.
If the disc is removed or the Reset
switch is pressed, the play position
memory is released.
• Operation may not be accepted
depending on the type of disc and
the playback conditions. At such a
time the following mark is displayed
on the screen: