Filter
Top Products
14
15
AMD20
● To select the tone (bass/treble), press the TONE button (22). To adjust the
tone, press the VOL + button or the VOL - button (18).
● To switch between sound effects (concert/living/hall/bath/cave/arena/
church), press the S.EFFECT button (20). Press the button once again to
exit this function.
● To mute or restore sound, press the MUTE button (27).
● To connect a headphone, insert the cable plug in the headphone jack (5).
To prevent hearing damage, remember to adjust the volume to a
comfortable level.
DVD/CD functions
● Switch on the appliance. Select the DVD mode.
● Place a disc in the disc tray. To open or close the disc tray, press the
OPEN/CLOSE button (47).
The display shows the total number of tracks on the CD.
● To start playback, press the PLAY/PAUSE button (46) once.
● For extended instructions, read the paragraph "DVD/CD functions" further
on in this manual.
Radio functions
● Switch on the appliance. Select the tuner mode.
● To tune to the station of your choice, press the SEARCH + button (48) or
the SEARCH - button (49) repeatedly until the frequency is found.
● For extended instructions, read the paragraph "Radio functions" further on
in this manual.
USB functions
● Switch on the appliance.
● Insert the USB device in the slot (6). The device can only be connected
one way.
● Select the DVD mode. Then select the correct function with the USB
button (21).
● To start playback, press the PLAY/PAUSE button (46) once.
● For extended instructions, read the paragraph "USB functions" further on
in this manual.
SD/MMC functions
● Switch on the appliance.
● Insert the SD/MMC device in the slot (7). The device can only be
connected one way.
● Select the DVD mode. Then select the correct function with the
USB button (21).
● To start playback, press the PLAY/PAUSE button (46) once.
● For extended instructions, read the paragraph "SD/MMC functions" further
on in this manual.
DVD/CD functions5.3
After the disc has been loaded, a content menu will display on the TV screen.
● Press the arrow buttons (19) to select a menu item.
● Press ENTER to enter the selected menu item.
During playback, the following functions are available:
● To select a chapter (DVD) or track (CD), press the digit buttons (16).
● To select the next or previous chapter (DVD) or track (CD), press the
PREV button (42) or the NEXT button (43).
● To forward or rewind the DVD, press the FWD button (31) or the REV
button (32). The available speed rates are: 2x, 4x, 8x, 16x, 32x.
● To pause playback, press the PLAY/PAUSE button (46) once; to resume
playback, press the button again.
● To stop playback temporarily, press the STOP button (38) once. Press the
button again to stop playback permanently, or press the PLAY/PAUSE
button (46) to resume playback.
● To repeat a chapter (DVD) or one or all tracks (CD):
Press the REPEAT button (37) once to repeat the current chapter or -
track.
Press the button once again (2x) to repeat the current title. -
Press the button once again (3x) to repeat all chapters or tracks. -
Press the button once again (4x) to cancel the function. -
● To play the DVD frame by frame, press the STEP button (35).
Press the PLAY/PAUSE button (46) to resume normal playback.
● To view a specic title of a DVD, press the TITLE button (33).
Use the arrow buttons to select the title.
● To select the audio language of a DVD, press the AUDIO button (34)
repeatedly until the desired language is set.
● To switch on the subtitles of a DVD, press the SUBTITLE button (41).
Press the button again to switch off the subtitles.
● To select extra information of a DVD or CD (remaining time/passed
playtime/track number/chapter number), press the OSD button (44).
● To select the camera angle, press the ANGLE button (45).