Akai AMD20 Stereo System User Manual


 
22
23
AMD20
i
The composite video output is the default setting for video output.
If the video output results in a poor image, then press the V-Mode button
(26) until the image is good.
COLOUR SETTING
SHARPNESS: Adjust the screen sharpness.
BRIGHTNESS: Adjust the screen brightness.
GAMMA: Adjust the colour intensity.
LUMA DELAY: Compensate the delay in the colour signal.
Preference setup page
i
The general system functions can only be set with an empty DVD
player.
TV TYPE
Select the video output format to match the appliance to the TV system:
PAL, MULTI or NTSC.
PBC (Playback Control)
Switch this function ON or OFF.
i
This function is only available for VCD 2.0, SVCD etc.
LANGUAGES
In the AUDIO section, choose the audio language.
In the SUBTITLE section, choose the subtitle language.
In the DISC MENU section, choose the language for the disc menu.
PARENTAL
Set a rating for movies played by the appliance.
The password to reset the rating is 136900.
i
This function is only available with discs that have parental rating
encoded.
DEFAULT
Restore the default settings of the appliance.
Password setup page
PASSWORD MODE: Switch the password function on or off. Enter the
correct password to switch the mode on or off.
PASSWORD: Change the default password. Enter the current password
in the rst box. Enter the new password in the second box. Enter the new
password again in the third box to conrm.
Cleaning and maintenance6.
!
WARNING
Before performing any cleaning or maintenance, switch off and
unplug the appliance.
Clean the outside of the appliance with a soft cloth. When the appliance is
very dirty, dampen the cloth slightly with water and a neutral solution.
Handle and care of a disc6.1
Hold the disc with ngers. Hold the disc outer edge and/or the centre
spindle hole. Do not touch the disc surface.
Do not bend or press the disc. Do not expose the disc to direct sunlight or
heating sources.
Clean the disc surface with a soft, dry cleaning cloth. Wipe the disc
surface gently, radially, from centre towards the outer edge.
Do not apply thinner, alcohol, chemical solvent, or sprays when cleaning.
Such cleaning uids will permanently damage the disc surface.