Aiwa CSD-MD50 Stereo System User Manual


 
-l
MD>=
~MULTl JOG
.,””,,.
All the tracks on the disc can be played randomly.
In stop mode, press the MODE button on the main unit
repeatedly until RANDOM? appears on the display, and
within 5 seconds, press the ENTER button.
To cancel random play
Instopmode, pressthe MODE buttononthe main unitrepeatedly
untilOFF appears on the display. Then, within5 seconds, press
the ENTER button.
m
Even if the <+ button is pressed, a previously played track
cannot be skipped. The unit returns to the beginning of the
current track only.
When you select a track with the numbered buttons on the
remote control during the random play mode, the selected track
starts to play and the random play mode is canceled.
REPEAT PLAY
A single track or all tracks can be played back repeatedly.
Press the REPEAT button on the remote control repeatedly.
“=1” lights
up when the single track repeat play is selected,
and “G” lights up when the all tracks repeat play is selected.
To cancel repeat play, press the REPEAT button repeatedly until
“=” and 1” disappear.
To select repeat play with the MODE button on the main unit
[n playback or playback pause mode, press the MODE button
repeatedly to select the desired repeat play mode.
To repeat random play
First activate random play.
Then
press the REPEAT button so that “=” lights up.
PROGRAMMED PLAY
Up to 20 tracks can be programmed from the inserted disc.
1
2
3
4
5
In stop mode, press the MODE button on the main
unit repeatedly until PROGRAM? appears on the
display.
Within 5 seconds, press the ENTER button.
Turn the MULTI JOG dial to select a track to
programmed, and press the ENTER button.
Total number of
Total playing time of
selected tracks
the selected tracks
be
Selected track number
Repeat step 3 to program other tracks.
Press the MD > button (or the - button on the
remote control) to start play.
To
check the program
Each time the - button is pressed in stop mode, a track
number and program number will be displayed.
To clear the program
Press the button in stop mode.
To add tracks to the program
Before playing, repeat step 3. The track will be programmed after
the last track.
To change the programmed tracks
Clear the program and repeat all the steps again.
m
During the programmed play, the MODE and numbered buttons
do not function.
Repeating programmed play is also possible.
If the programmed time exceeds 199 minutes 59 seconds, or
the disc track number 31 or above is programmed, the display
shows --:-- as the total playing time.
16 EArGL/SH