Filter
Top Products
To change a character
REGISTERING STATION NAME
#------7
You can register a desired name to a station which has already
been stored in memory.
The registered name appears on the display when the station is
tuned in.
1
2
3
4
5
6
7
8
9
Press the TUNER/BAND button on the main unit
or the BAND button on the remote control to
select a band.
Press the 11 button or turn the MULTI JOG dial
to select a preset station.
Press the EDIT button repeatedly until NAME
EDIT ? appears.
Within 5 seconds, press the ENTER button.
The unit turns into character entry mode.
Press the MODE button repeatedly to select the
kind of character.
Capital letters + Smal[ letters
Number/symbol <
Turn the MULTI JOG dial to select a desired
character.
Press the ›~ button.
Repeat steps 5 to 7 to enter all the required
characters
(up to 12 characters).
If you leave the unit without performing any operation for one
minute in steps 5 to 7, the character entry mode will be
canceled. If this happens, repeat from step 3.
Press the ENTER button.
The entered station name is displayed.
Press the <+ or - button repeatedly until the character to
be changed flashes. Then enter the desired character again.
To delete characters
Press the 4+ or - button repeatedly until the character to
be deleted flashes. Then press the II button.
To insert a space between the characters
Press the < or - button repeatedly until the part to be
entered as a space flashes. Then press the DISP button.
To add a character between two characters
First, insert a space between two characters as described above.
Then change the space to the desired character by entering it.
1() ENGLISH