Filter
Top Products
OPERATION
LD,SP
ACD EJECT ~++ ➤>
LOADING A DISC
Press the A CD EJECT button to open the disc
compartment. Load a disc with the label side up
and close the disc compartment.
{—ACD EJECT
Depending on the unit’s status, TOC READING may appear while
the unit reads the data of the inserted disc.
PLAYING A DISC
Load a disc.
Press the CD ~ button.
TOC READING appears on the display while the unit reads the
data of the loaded CD, then play begins with the first track.
Number of track being played
Elapsed playing time
To stop play, press the ■ button.
To pause play, press the II button. To resume play, press the
CD - button.
To search for a particular point during playback, keep the
44 or
➤F button pressed and release the button at the desired
point.
To
skip to the beginning of a track during playback, press
the 4+ or
➤- button repeatedly or turn the MULTI JOG dial.
The unit skips forward through the tracks when turning it right,
and skips back when turning it left.
To
remove the disc, press the ~ CD EJECT button.
Selecting a track with the remote control
Press the numbered buttons and the +1Obutton to select a track.
Example:
To select the 25th track, press the +1 O, +10 and 5 buttons.
To select the 10th track, press the +10 and O buttons.
The selected track starts to play and play continues to the end
of that disc.
Display in stop mode
“The display shows the following information.
Music calender (only the first
Total number of tracks
20 tracks are displayed)
I
Total playing time
To change the display during playback
lPress the DISP button (or the DISPLAY button on the remote
control) during playback.
“The display changes in the following order.
+ @ Elapsed playing time of the track being played
@] Remaining playback time of the current track
— @ Total remaining playback time of the loaded CD
“Fhe total remaining playback time cannot be displayed when
random play or single track repeat play (page 12) is performed.
,, DO not use irregular shape CDs (example: heart-shaped,
octagonal ones). It may result in malfunction,
t, When
loadingan%xn (3-inch) disc, put it onto the inner circle
of the tray.
~,
DO not place more than one compact disc on the disc tray.
To start play when the power is off (Direct Play
Function)
Press the CD - button. The power is turned on and play of the
loaded disc begins.
To replace the disc before play, press the ~ CD EJECT button
to open the disc compartment.
ENGLISH I I