Filter
Top Products
20
ENGLISH
LISTENING TO EXTERNAL
SOURCES
POWER
AUX
a
TO PLAY EQUIPMENT CONNECTED TO THE
VIDEO/AUX JACKS
1
Press AUX on the remote control, or press
FUNCTION on the main unit repeatedly until
"AUX" appears on the display.
2
Play the connected equipment.
To change a source name in the display
When AUX on the remote control is pressed, "AUX" is displayed
initially. It can be changed to "VIDEO" or "TV".
With the power on, press POWER while pressing a on the main
unit.
Repeat the procedure to select one of the names.
CONNECTING OPTIONAL
EQUIPMENT
VIDEO/AUX
DIGITAL OUT
(OPTICAL)
SUPER WOOFER
Refer to the operating instructions of the connected equipment
for details.
• The connecting cords are not supplied. Obtain the necessary
connecting cords.
• Consult your local Aiwa dealer for optional equipment.
VIDEO/AUX JACKS
Analog sound signals can be input through these jacks.
Use a cable with RCA phono plugs to connect audio equipment
(turntables, LD players, MD players, VCRs, TV, etc.).
Connect the red plug to the R jack, and the white plug to the L
jack.
When connecting a turntable
Use an Aiwa turntable equipped with a built-in equalizer amplifier.
DIGITAL OUT (OPTICAL) JACK
CD digital sound signals can be output through this jack. Use an
optical cable to connect digital audio equipment (digital amplifier,
DAT deck, MD recorder, etc.).
Remove the dust cap a from DIGITAL OUT (OPTICAL) jack.
Then, connect an optical cable plug to DIGITAL OUT (OPTICAL)
jack.
DIGITAL
OUT
(OPTICAL)
DIGITAL
OUT
(OPTICAL)
When DIGITAL OUT (OPTICAL) jack is not being used
Attach the supplied dust cap.
3 SUPER WOOFER JACK
Connect an optional powered sub woofer with a built-in amplifier
to the jack.
OTHER CONNECTIONS