Aiwa NSX-A555 Stereo System User Manual


 
Speaker svstem SX-WNA555
Main unit CX-NA555
FM tuner section
Tuning range
Usable serrsivity (IHF)
Antenna lerminals
AM tuner section
Tuning range
Usabla sensitivity
Antenna
Amplifier section
Mid-high frequency amplifier
Power output
Total harmonic distortion
Low frequency amplifier
Power output
Total harmonic distortion
Inputs
outputs
Cassette deck section
Track format
Frequency response
Recording system
Heads
87.5 tvIFlzto 108 MHz
13.2 dBf
75 ohms (unbalanced)
530 kHz to 1710 kHz (10 kHz step)
531 kHz to 1602 kHz (9 kHz step)
350 pVlm
Loop antenna
15 W+ 15 W(200 Hz-20 kHz,
THD less than 1%, 8 ohms)
0.06
Y. (10 W, 1 kHz, 8ohms, DIN
AUDIO)
35 W + 35 W (50 Hz–200
Hz, THD
less than 17., 4 ohms)
0.06 Y. (25 W, 135 Hz,4ohms, DIN
AUDIO)
VIDEO/AUX: 300 mV (adjustable)
SPEAKERS HIGH FREQ:
accept speakers of 8 ohms or more
SPEAKERS LOW FREQ:
accept speakers of 4 ohms or more
SURROUND SPEAKERS:
accept speakers of 8 ohms to 16
ohms
PHONES (stereo jack): accepts
headphones of 32 ohms or more
4 tracks, 2 channels stereo
50 Hz 15000
HZ
AC bias
Deck 1:Playback head x 1
Deck 2:Re~ording/playback
x 1, erase head x 1
Compact disc player section
Laser
D-A converter
Signal-to-lnoise ratio
Harmonic distortion
Wow and iflutter
General
Power requirements
Power consumption
Dimensions of main unit
(W XHXDI)
Weight of main unit
head
Semiconductor laser (k= 780 nm)
1 bit dual
85 dB (1 kHz, OdB)
0.057. (1 kHz, OdB)
Unmeasurable
120 V AC, 60 HZ
120W
260 x 330 x 355 mm
(10’/4xl3xl4in.)
8.Okg (17 Ibs 10 OZ.)
Cabinet type
Speakers
Impedance
Output sound pressure level
Dimensions (W x H x D)
Weight
2 way, subwoofer (magnetic
shielded type)
Subwoofer:
160 mm (6 3/8in,) cone type
Full range:
100 mm (4 in.) cone typa
4 ohms/8 ohms
87 tfBIWlm
240 x 324 x 275 mm
@ ‘/2x 12 7/8x 10 7/8in.)
4.8 kg (10 Ibs 9 OZ.)
Specifications and external appearance are subject to change without
notice.
COPYRIGHT
Please check the laws on copyright relating to recordings from
discs, radio or external tape for the country in which the machine
is being used.
NOTE
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that
interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference
by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on circuit different from
that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician
for help,
CAUTION
Modifications or adjustments to this product, which are not
expressly approved by the manufacturer, may void the user’s
right or authority to operate this product.
22 ENGLISH