Filter
Top Products
This section explains how to record from the tuner, CD player, or
external equipment.
II
■
/-;. --- _._—
=+
9
Preparation
● Use Type I (normal) tapes only.
● Set the tape to the point where recording will start.
● Note that recording is done on only one side of the tape.
1
2
3
Insert the tape to be recorded on into deck 2.
Insert the tape with the side to be recorded on first facing
from the unit.
out
.APUSH
EJECT
I
NJ
Press function (CD, TUNER or VIDEO/AUX) and
prepare the source to be recorded.
To record from a CD, press CD and load the disc(s).
To record from a radio broadcast, press TUNER and tune
in to a station.
To record from a connected source, press VIDEO/AUX.
Press ● REC/REC MUTE to start recording.
When recording from a connected source, start play~ack of
the source.
m
When the selected function is CD, playback and recording
start simultaneously.
To stop recording, press
■ .
To pause recording, press II. (Applicable when the source is
TUNER or VIDEO/AUX) To resume recording, press it again.
Sound adjustment during recording
The output volume and tone of the speakers or headphones are
freely varied without affecting of the recording.
.-d
.W. ”,,ld,, p,,,,,”,., J,”j ~“w. , .$..w=w .,-.., !4&&=g,ag, a. . .. . ,. , ,*8,., , .. ,”... . ., .. . ..=os.zkiJ-.8. -,!s~o,, a!. roYJs.?.-& ! m~J, -. ..* :s .. .
. . ... . . . ..
. . .
iNSERTING BLANK SPACES
Insertion of 4-second blank spaces enables you to activate the
Music Sensor function. (Applicable when the source is TUNER
or VIDEO/AUX.)
1 Press
● REC/REC MUITE,during recording or while in
recording pause mode.
~ on the display flashes lor 4 seconds and 4-second blank
space is made, Then, the cleck enters the recording pause
mode.
2 Press II to resume recorcling.
To insert a blank space of less than 4 seconds, press
●
REC/REC MUTE again while ~ is flashing.
To insert blank spaces of more than 4 seconds, after the deck
enters recording pause mode, press
● REC/REC MIJTE again.
Each time the button is pressed, a 4-second blank space is
added.
About cassette tapes
● To prevent accidental erasure, break off the plastic tabs
on the cassette tape after recording with a screwdriver or
other pointed tool.
To record on the tape again, cover the tab openings with
adhesive tape, etc.
● 120-minuteor longer talpes are extremely thin and easily
deformed or damaged. They are not recommended.
● Take up any slack in the tape with a pencil or similar tool
before use. Slack tape may Ibreakor jam in the mechanism.
P&-]
)-;TA-
A%
AJn
—
m
“CAN’T REC is displayed if you attempt to record on a tape with
the plastic tabs broken off,
To erase a recording
1 Insert the tape to be erased into deck 2 and press TAPE DECK
1/2 to display “TP 2.
2 Set the tape to the point Vvh<?rethe erasure is to be started.
3 Press
● REC/REC MUTE tostart the erasure.
14 ENGLISH