Filter
Top Products
1
2
3
!
.-..—
;c——– ——––-
The clock is displayed. (The “:” between the hours and minutes
flashes.) When the power cord is plugged into an AC outlet
for the first time after purchase or when the clock setting is
canceled due to a power failure, the entire clock display
flashes.
Press CLOCK.
When using the remote control, press CLOCK while pressing
SHIFT.
Within 4 seconds, turn MULTI JOG to designate
the hour and the minute.
Turning MULTI JOG changes both the hour and the minute.
+ or ~ is also available instead of MULTI JOG. Holding
these buttons down will vary the time rapidly.
Press ENTER or Il.
The clclck starts from 00 seconds.
To restore an original clock setting
Press CLOCK before completing step 3 to restore the previous
time setting. This cancels any new setting.
To view
tlhe clock when another display is in the display
Press CLC)CK. The time is displayed for 4 seconds and then the
original display reappears. However, the clock cannot be
displayed during recording.
To switchl to the 24-hour standard
Press the CLOCK and then press
■ within 4 seconds.
Repeat th[? same procedure to restore the 12-hour standard.
I If the clock display flashes
I
If the display flashes when the clock is displayed, it indicates
that the clock has stopped due to a power failure or the removal
of the power cord. The current time needs to be reset.
The unit can be turned off automatically at a specified time,
Use the remote control.
1
2
Press SLEEP while pressing SHIFT.
Within 4 seconds, turn MULTI JOG to specify the
time until the power is turned off.
The time changes between 5 and 240 minutes in 5-minute
steps.
+ and - are also available instead of MULTI JOG.
Specified time
While the timer is in operation, the clisplay indication is dimmer
than usual.
To check the time remaining until the power is turned off
Press SLEEP once while pressing SIHIFT.The remaining time is
displayed for 4 seconds.
To cancel the sleep timer
Press SLEEP twice while pressing SHIFT so that “SLEEP oFF
appears on the display.
If the power-economizing mode (page 7) is on, all the display
lights turn off when the power is turned off. To view the clock,
press CLOICK so that the time is displayed for 4 seconds.
18 ENGLISH