Filter
Top Products
SPECIFICATIONS
Main unit CX-NAV900
FM tuner section
Turning range
Usable sensitivity (IHF)
Antenna terminals
AM tuner section
Tuning range
Usable sensitivity
Antenna
Amplifier section
Power output
Total harmonic distortion
Inputs
outputs
Cassette deck section
Track format
Frequency response
Signal-to-noise ratio
Recording system
Heads
87.5 MHz to 108 MHz
13,2 dBf
75 ohms (unbalanced)
530 kHz to 1710 kHz
step)
(10 kHz
531 kHz to 1602 kHz (9 kHz step)
350 pV/m
Loop antenna
Front
100 watts per channel, Min.
RMS at 6 ohms, from 50 Hz to
20 kHz, with no more than 1%
Total Harmonic Distortion
Rear (Surround)
10 watts per channel, Min. RMS
at 16 ohms, 1 kHz, with no more
then 170TotalHarmonicDistortion
Center
20 watts, Min, RMS at 8 ohms, 1
kHz, with no more than 1 “ATotal
Harmonic Distortion
0.1 % (50 W, 1 kHz, 6 ohms, DIN
AUDIO/Front)
VIDEO/AUX: 150 mV (adjustable)
MIC 1, MIC 2:1 mV (10 kohms)
LINE OUT 200 mV
SUPER WOOFER: 2.45 V
SPEAKERS: accept speakers of
6 ohms or more
SURROUND SPEAKERS:
accept speakers of 16 ohms or
more
CENTER SPEAKER: accept
speakers of 8 ohms or more
PHONES (stereo jack): accepts
headphones of 32 ohms or more
4 tracks, 2 channels stereo
CrO, tape: 50 Hz -16000 Hz
Normal tape: 50 Hz – 15000 Hz
60 dB (Dolby BNR ON, CrO, tape
peak level)
AC bias
Deck 1: Plavback head x 1
Deck 2: Recording/playback/
erase head x 1
Compact disc player section
Laser
Semiconductor laser (k= 780 nm)
D-A converter
1 bit dual
Signal-to-noise ratio
90 dB (1 kHz, OdB)
Hlarmonic distortion
0.03 % (1 kHz, OdB)
Wow and flutter
Unmeasurable
Cabinet type
Speakers
Speaker system SX-NAV900
3 way, bass reflex (magnetic
shielded type)
Woofer:
140 mm
(55/8 h.) cone type
Tweeter:
60 mm (23/8in.) cone type
Super tweeter:
20 mm
(13/16 in.) Ceramk type
6 ohms
87 dB/Wlm
235 x 302 x 250 mm
(93/8 x 12 x
9’/8 in, )
3,5 kg (7 Ibs 6 OZ.)
Impedance
Output sound pressure level
Dimensions (W x H x D)
Weight
General
Power requirements
Power consumption
Dimensions of main unit
(W XHXD)
Weight of main unit
120 VAC, 60
Hz
130W
260 x 308 x 339 mm
(10’/, x 12’/, x 133/6in.)
9.5 kg (20 Ibs 15
OZ.)
Specificationsand external appearance aresubject to changewithout
notice.
WW5YSTEA4
The word “BBE” and the “BBE symbol” are trademarks of BBE
Sound, Inc.
Under license from BBE Sound, Inc.
DOLBY NR/DOLBY PRO
LOGIC
Manufactured under license from Dolby Laboratories Licensing
Corporation.
“DOLBY”, the double-D symbol
❑D and “PRO LOGIC” are
trademarks of Dolby Laboratories Licensing Corporation.
❑
COPYRIGHT
Please check the laws oncopyright relating to recordings from discs,
radio or external tape for the country in which the machine is being
used,
NOTE
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protec-
tion against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communi-
cations. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is
encouraged totrytocorrect the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna,
- Increase the separation between the equipment and re-
ceiver.
- Connect the equipment into an outlet on circuit different
from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician
for help.
CAUTION
Modifications or adjustments to this product, which are not
expressly approved by the manufacturer, may void the user’s
right or authority to operate this product.
ENGLISH 24