Aiwa NSX-AV900 CD Player User Manual


 
Selecting a track with the remote control
1 Press one of the DISC DIRECT PLAY buttons to select a disc.
2 Press the numeric buttons and the +10 button to select a
track.
Example:
To select the 25th track, press the +10, +10 and 5 buttons.
To select the 10th track, press the +1Oand Obuttons.
The selected track starts to play and continues to the end of
that disc.
Replacing discs during play
While one disc is playing, the other discs can be replaced without
interrupting play.
1 Press the DISC CHANGE button.
2 Remove the discs and replace with other discs.
3 Press the = OPEN/CLOSE button to close the disc
compartment.
RANDOM PLAY
All the tracks on the selected disc or on all the discs can be
played randomly.
Press the RANDOM button on the remote control.
RANDOM lights up on the display.
To cancel random play, press again.
* Even if the <4f button is pressed, a previously played track
cannot be skipped. The unit returns to the beginning of the
current track only.
Direct selection of the tracks with the numeric buttons is not
possible.
REPEAT PLAY
A single disc or all the discs can be played repeatedly.
Press the REPEAT button on the remote control.
C lights up on the display.
1-0cancel repeat play, press again.
PROGRAMMED PLAY
(JP to 30 tracks can be programmed from any of the inserted
discs.
Use the remote control.
1
Press the PRGM button twice in stop mode.
The PRGM indicator flashes on the display.
2
3
4
5
Press one of the DISC DIRECT PLAY buttons to
select a disc.
The selected disc is indicated in red on the display.
Go to the next step when the tray stops rotating.
Press the numeric buttons and the +10 button to
program a track.
Example:
To select the 25th track, press the +1O,+1Oand 5 buttons.
To select the 10th track, press the +1O and Obuttons.
Total playing time of
Program number
the selected tracks
Selected track number Total number of
selected tracks
Repeat steps 2 and 3 to program other tracks.
Press the 4 F button to start play.
To check the program
Each time the
< or >- button is pressed in stop mode, a
disc number, track number, and program number will be
displayed.
To clear the program
Press the
CLEAR button in stop mode,
To add tracks to the procfram
Before playing, repeat s;eps 2 and 3. The track will be
programmed after the last track.
To change the programmed tracks
Clear the program and repeat, all the steps again,
During the programmed play, the CD EDIT/CHECK, DISC
CHANGE, DISC DIRECT, RANDOM and numeric buttons do
not function.
* When the PRGM button is pressed once in step 1, the unit
enters the KARAOKE PROGRAM (page 20).
ENGLISH 12