Filter
Top Products
DUBBING A TAPE MANUALLY
DUBBING THE WHOLE TAPE
Preparation
. Set the tape to the pointwhere recordin9 will start.
* The reverse mode is automatically set to 1. Note that recording
will be done on one side of the tape only,
Press the TAPE button,
Insert the original tape into Deck 1 and the tape
to be recorded on into Deck 2.
Insert the tapes with the sides to be played back or recorded
on first facing out from the unit.
Press the DOLBY NR button to turn off the Dolby
NR.
no
NR on the display goes out.
Press the TAPE/DECK 1/2 button to select
Deck 1.
TAPE 1 is displayed.
Press the @ REC/REC MUTE button to start
recording.
Playing and recording start simultaneously.
To stop dubbing
Press the
■ button.
10 set the Dolby NR when playing back the dubbed tape
Press the DOLBY NR button and turn Dolby NR on or off to
match the original tape,
This function allows you to make exact copies of both sides of
the original tape. The reverse
side of both tapes will start
simultaneously as soon as the longer tape
has been reversed.
m
● Dubbing does not start from a point halfway in the tape.
● The reverse mode is automatically set to Z>.
● The Dolby NR does not affect recording.
1
2
3
Press the TAPE button.
Insert the original tape into Deck 1 and the tape
to be recorded on into Deck 2.
Insert each tape with the side to be played back or recorded
on first facing out from the unit.
Press the SYNC DUB button once or twice to start
6
recording.
@
For recording at normal speed, press it once to display
N-DUB.
@ For recording at high speed, press it twice to display H-
DUB,
0
@
The tapes are rewound to the beginning of the front sides,
and recording starts.
To stop dubbing
Press the
❑ button.
To set the Dolby NR when playing back the dubbed tape
Press the DOLBY NR button and turn Dolby NR on or off to
match the original tape.
● Recording does not start, ifthe erasure prevention tab on either
side of the tape is broken off.
● If the leader segment of the tape to be recorded on is longer
than that of the original tape, recording on the reverse side
may stop midway through the recording. In this case, dub each
side manually following the procedure in
“DUBBING A TAPE
MANUALLY”,
ENGLISH I 4