Filter
Top Products
——
PRESET NUMBER TUNING
BASIC OPERATIONS
2
1
Use the remote control to select the preset number directly.
7 Press the TUNEFUBAND button to select a band.
2 Press the numeric buttons to select a preset
number.
Example:
Toselect preset number 25, press the +10, +10 and 5 buttons.
To select preset number 10, press the +10 and Obuttons.
Selecting a preset number on the main unit
Press the TUNER/BAND button to select a band. Then, press
the < E DIRECTION/PRESET button repeatedly.
Each time the button is pressed, the next highest number is
selected.
\
About cassette tapes
● To prevent accidental erasure, break off the plastic tabs
on the cassette tape after recording with a screwdriver or
other pointed tool.
Side A
~.
q
, <Q;YQ
I L@
.>
Type II tape
Tab for side A
detection
slot
/
To record on the tape again, cover the tab openings with
adhesive tape, etc. (On Type II tapes, take care not to
cover the Type II tape detection slot.)
● 120-minute or longer tapes are extremely thin and easily
deformed or damaged. They are not recommended.
cTake up any slack in the tape with a pencil or similar tool
before use. Slack tape may break or jam inthe mechanism.
DOLBY NR system
The Dolby Noise Reduction system reduces tape hiss noise.
For optimum performance when playing back a tape
recorded with the DOLBY NR system, turn on the DOLBY
NR system.
/
&
Deck2
INSERTING TAPES
● On deck 1, tapes are always played back on both sides.
On deck 2, you can select a reverse mode to play back one or
both sides.
● Use Type I (normal), Type 11(high/CrOp) or Type IV (metal)
tapes for playback.
Press theTAPE button and press the& EJECT mark
to open the cassette holder.
A
Insert a tape with the exposed side down. Push the cassette
holder to close.
To select a reverse mode (deck 2 only)
Each time the REV MODE button is pressed, the reverse mode
changes.
k=
+=)+C2J
To play one side only, turn on =.
To play from front side to back side once only, turn on Z).
To play both sides repeatedly,
● When tapes are loaded in
indicates Continuous Play.
turn on C=).
both decks, =) in the display
9 ENGLISH